summoner12
Avid Member
AquaZamp Labor Day sale!
Save this week and next week with superior quality and superior service from AquaZamp!
Purchase a Premium RainDome System or Premium Mist System and receive free shipping* of these systems to the continental USA.
Purchase a Premium LowProfile RainDome System and save $25!
Also save expanding your system!
Coupon codes:
Coupon codes are case sensitive.
Any questions email: [email protected]
Key features of the AquaZamp systems for those of you still undecided or unfamiliar with AquaZamp.
AquaZamp uses components made in the USA. Our pumps, fittings, tubing, the RainDomes and water reservoir are all made in the USA, even our packaging! Items will ship from southern California.
A great feature of the Premium Systems is that the pump is mounted to the lid of the water reservoir, and so is the water pick-up tube. This means that the water reservoir is easy to refill and clean without worrying about disconnecting the power or water lines from the pump. You also don't have to worry about ruining the pump by getting it wet while you clean the reservoir. Just lift off the lid and set aside for easy reservoir cleaning and filling.
The water pick-up being connected to the lid also means that the water reservoir does not require a hole be drilled in the side of it. This simple method saves you the worry of a leaking bulkhead gasket that can ruin furniture, floors or ceilings below. You also do not need to disconnect the water line when refilling your reservoir. This helps on the wear and tear of the system.
Our Premium Systems come with the reservoir and everything you need to get started! Just add water! All holes are cut in the lid and plastic fasteners are provided. We use plastic fasteners so there is no chance of rust.
Not only are the water components made in the USA, they are also NSF certified components. This means that they are food grade quality. Even the water reservoir in our Premium systems is made of NSF materials. This means our plastics don't leach chemicals or metals into the water your animals are drinking. NSF certification is a very expensive process and represents the highest of quality.
Our fittings and tubing are also pressure rated. This means you won't come home to a tube that has popped out of a fitting and is pumping gallons of water onto your floor. The fittings have two O-rings to seal the tubing to the fitting. This ensures a maximum seal even with an extreme angle of the tubing to the fitting (for instance the tubing is being pulled un-expectedly). Two O-rings can conform to the tubing and fitting better than one. The tubing is rated at 250psi and the fittings are rated to 140psi at 70*f. It is impressive how firm these components fit together.
Here is a video of how to assemble a Premium system: Link
To make the holes for the reservoir we use an aluminum template that is machine built. Here is the making of that template: Link
RainDome in action at the Pomona Reptile Super Show
Premium System Assembled:
LowProfile RainDome:
*Shipping is for the cost to ship the Premium Mist or RainDome system. Items added to the system that can't ship within the same carton might require extra shipping. Most items fit, but items like drain pans will not. If you have any questions feel free to email: [email protected]
Save this week and next week with superior quality and superior service from AquaZamp!
Purchase a Premium RainDome System or Premium Mist System and receive free shipping* of these systems to the continental USA.
Purchase a Premium LowProfile RainDome System and save $25!
Also save expanding your system!
- LowProfile RainDome $30 (normally $40)
- LowProfile RainDome Conversion Kit $20 (Normally $30)
- Standard RainDome $15 (Normally $18)
- Misting nozzle $15 (Normally $18)
Coupon codes:
Coupon codes are case sensitive.
- Free shipping: FShip
- $25 off Premium LowProfile RainDome System: Save25
- $10 off LowProfile RainDome: Save10
- $10 off LowProfile RainDome Conversion Kit: Save10
- $3 off Misting and Standard RainDomes: Save3
Any questions email: [email protected]
Key features of the AquaZamp systems for those of you still undecided or unfamiliar with AquaZamp.
AquaZamp uses components made in the USA. Our pumps, fittings, tubing, the RainDomes and water reservoir are all made in the USA, even our packaging! Items will ship from southern California.
A great feature of the Premium Systems is that the pump is mounted to the lid of the water reservoir, and so is the water pick-up tube. This means that the water reservoir is easy to refill and clean without worrying about disconnecting the power or water lines from the pump. You also don't have to worry about ruining the pump by getting it wet while you clean the reservoir. Just lift off the lid and set aside for easy reservoir cleaning and filling.
The water pick-up being connected to the lid also means that the water reservoir does not require a hole be drilled in the side of it. This simple method saves you the worry of a leaking bulkhead gasket that can ruin furniture, floors or ceilings below. You also do not need to disconnect the water line when refilling your reservoir. This helps on the wear and tear of the system.
Our Premium Systems come with the reservoir and everything you need to get started! Just add water! All holes are cut in the lid and plastic fasteners are provided. We use plastic fasteners so there is no chance of rust.
Not only are the water components made in the USA, they are also NSF certified components. This means that they are food grade quality. Even the water reservoir in our Premium systems is made of NSF materials. This means our plastics don't leach chemicals or metals into the water your animals are drinking. NSF certification is a very expensive process and represents the highest of quality.
Our fittings and tubing are also pressure rated. This means you won't come home to a tube that has popped out of a fitting and is pumping gallons of water onto your floor. The fittings have two O-rings to seal the tubing to the fitting. This ensures a maximum seal even with an extreme angle of the tubing to the fitting (for instance the tubing is being pulled un-expectedly). Two O-rings can conform to the tubing and fitting better than one. The tubing is rated at 250psi and the fittings are rated to 140psi at 70*f. It is impressive how firm these components fit together.
Here is a video of how to assemble a Premium system: Link
To make the holes for the reservoir we use an aluminum template that is machine built. Here is the making of that template: Link
RainDome in action at the Pomona Reptile Super Show
Premium System Assembled:
LowProfile RainDome:
*Shipping is for the cost to ship the Premium Mist or RainDome system. Items added to the system that can't ship within the same carton might require extra shipping. Most items fit, but items like drain pans will not. If you have any questions feel free to email: [email protected]
