Misting nozzle end caps

[Evanstouffer1]

I recently got my dragon strand hybrid cage and i want to put a misting nozzle in the cage but my misting system only came with one end cap and thats on my other enclosure. Does anyone know how i could make one?

 

[Klyde O'Scope]

Do you mean the little nozzle condom that goes over the tip of the nozzle?
If so, those are only to prevent damage during shipping; once removed they are not needed.

Or do you mean the nozzle itself? MK nozzles are available at most MK dealers. IIRC, they're around $15 but by all means shop around. Just look carefully and get the configuration you want. You may also need an elbow or T.
You should have gotten a mounting bracket with the enclosure.

 

[Evanstouffer1]

Do you mean the little nozzle condom that goes over the tip of the nozzle?
If so, those are only to prevent damage during shipping; once removed they are not needed.

Or do you mean the nozzle itself? MK nozzles are available at most MK dealers. IIRC, they're around $15 but by all means shop around. Just look carefully and get the configuration you want. You may also need an elbow or T.
You should have gotten a mounting bracket with the enclosure.

No, it on one end of the sprayer is an opening to put your tube to have water for the sprayer to spray and the other end is another opening to keep water running through another tube to another sprayer but for the one in my new cage i dont have another end cap to cap it off since im not adding another sprayer beside it and the misting system i purchased only came with one end cap for some reason and i cant find where to buy only the end caps

 

[nightanole]

Its just a 1/8 mpt, end caps should be easy to find, or ball valves.

http://www.ecologictechnologiesinc.com/misting_systems_misting_nozzles.html

 

[Klyde O'Scope]

I'm not aware of an "end cap" but it sounds like you have a T fitting and you want an L fitting. The fittings pop right off with a little pressure on the ring they're inserted into. I had to switch one just the opposite—from an L to a T.

Here's one source, but there are others.
https://www.joshsfrogs.com/misting/mistking-misting-system-parts.html

 

[Tige21v]

They make a plug for RO fittings.
https://www.amazon.com/dp/B01439OIO...abc_81CRKNDA7EH96H5KEN9B?_encoding=UTF8&psc=1

You pick up a 90 at your local big box store

 

[Klyde O'Scope]

MK makes those plugs as well; one comes with the starter kit.
Also available thru MK dealers for a buck each.
https://www.joshsfrogs.com/mistking-value-inch-plug.html
When OP said "cap" I wasn't thinking "plug"—my bad.