Mistking Timer Help Please!!

[Klinger #4077]

I have no clue how to set my ST 24 timer to go off 3 times a day or so. I ordered my mistking around March or last year, the company forgot to give me the nozzles so I emailed them and they gave me a second timer (which didn't help anything at all). Today I stumbled across my second timer and read it for fun and discovered that I could have it go off daily, BUT the instructions aren't that helpful. I need some help please lol

 

[Lathis]

The controls are not as intuitive as I would like them, but once you do it a few times, you can figure it out easy. There are 4 buttons - clock, set, and up and down.

First set your time. Hit clock and play with it to set your current time. Make sure that AM and PM are correct - this is a common point where people have problems. Then toggle back to the home screen so that nothing is blinking.

Then, you can use the "set" button to toggle through your misting sessions.

The first time you hit "set", use the other buttons as up and down arrows to put it on "auto". "On" will mist without ever stopping (until the next programmed end, I think but am not sure) and "off" turns off everything, even all programmed sessions.

Hit set again - this will be your first misting session. Again, use the clock button to move between start time to duration to frequency, and the other two buttons as up and down to increase or decrease the value

- the first number is the time you want the mist to start - again check your AM/PM setting

- the second number is the how long you want the mist to run HOURS:MINUTES:SECONDS (NOT the end time - this is the number one place where people have problems because the old time used start and end times), so a 10 minute misting session would be 00:10:00

- above is a little strip that sets the days, toggle this until you hit "week" for every day

- use set to move to the next setting (there are 9 total) and repeat above

- when you are done, you will probably only use 3 or 4 sessions, max, keep hitting set until you toggle back to the home screen, and everything should be ready to work!

I would suggest setting a test session for one minute from the current time for 30 seconds so you can be sure you have set your times right.

 

[Klinger #4077]

The controls are not as intuitive as I would like them, but once you do it a few times, you can figure it out easy. There are 4 buttons - clock, set, and up and down.

First set your time. Hit clock and play with it to set your current time. Make sure that AM and PM are correct - this is a common point where people have problems. Then toggle back to the home screen so that nothing is blinking.

Then, you can use the "set" button to toggle through your misting sessions.

The first time you hit "set", use the other buttons as up and down arrows to put it on "auto". "On" will mist without ever stopping (until the next programmed end, I think but am not sure) and "off" turns off everything, even all programmed sessions.

Hit set again - this will be your first misting session. Again, use the clock button to move between start time to duration to frequency, and the other two buttons as up and down to increase or decrease the value

- the first number is the time you want the mist to start - again check your AM/PM setting

- the second number is the how long you want the mist to run HOURS:MINUTES:SECONDS (NOT the end time - this is the number one place where people have problems because the old time used start and end times), so a 10 minute misting session would be 00:10:00

- above is a little strip that sets the days, toggle this until you hit "week" for every day

- use set to move to the next setting (there are 9 total) and repeat above

- when you are done, you will probably only use 3 or 4 sessions, max, keep hitting set until you toggle back to the home screen, and everything should be ready to work!

I would suggest setting a test session for one minute from the current time for 30 seconds so you can be sure you have set your times right.

Many thanks! I'll test this the next time I have a day off and let you know how it worked!

 

[xrowdac]

DONT FORGET the time display show on the LCD are in 2-groups,, LEFT is the actual time u want to fire...while the RIGHT is your Duration (HH-MM-SS) once u dialed your desired settings..PRESS again the SET button... There are 10 empty programs u can use.. from P0-P10 u can use P0-P2 for ur 3x day misting...

Note: Make sure the LCD displays shows "AUTO" (in small letters) means it will use the programs u made..

For safety and no flooding...you must run a pre-test of all 3 progams u made..to make sure the cycles and firing & correct as per ur liking..