Blevine1292
New Member
okay well, not quite. But its pretty much the MistKing of DIY's. So this is what i did: The whole contraption cost 60 bucks after tax and everything. all of which i purchased at lowes. the parts are 2 quarter circle fan spray, an adjustable dripper, 3 mister risers, a 2 foot 1/2 inch poly tube and a stake assembly(all are made by a company called Mister Landscaper) 2 1/2 inch PVC caps and a Tetra 330 GPH statuary pump. I glued the PVC caps onto the end of the poly tube. Drilled 3 holes into the tube so the mister risers to go in, attached the dripper and the 2 quarter circle fan sprays to the risers and then drilled a fourth hole into the back of the poly tube for the stake assembly to go into (the stake assembly comes with a stake, i just threw that out, all i needed was the hose to attach the pump to the tube.) i put a fixture the pump came with that fit the hosing from the stake assembly and attached one end of the hose to the pump and the other into the tubing with the piece that came on the end of the hose. And thats it! each mister has an individual valve to turn it on and off and there is a master valve on the pump tubing. i shut off the two pumps while im out and it has a steady drip from the middle dripper. the whole set up is on a timer so it sprays 3 times a day for 30 seconds. i'm extremely satisfied with how it came out. heres a picture of it so you can see what it looks like, ill get a video of it in action within the next couple days.