Mistking on its way!!
- Thread starter Daniel266jz
- Start date
Daniel266jz
Avid Member
Its like you read my mind because thats exactly what i did when i get home it should be ready! hopefully its works.
Daniel266jz
Avid Member
Yes I'd recommend it it still spray enough where you'd get water buildup
Daniel266jz
Avid Member
Update it's still won't work it drips in any reservoir I put it to so I want to return it. If I return do I return to Mist King or LLLreptile where I purchased? Or is there someway to get a new one?
J.Bauer
Member
Is it leaking around the bulkhead or through it where the tube connects? I also used a sterilite container for the res. If the tube isn't cut flush on the end, it won't seal inside the quick connect. If the hole drilled in the container isn't to spec or has a jagged edge, it can cause leaks.
Attachments
Daniel266jz
Avid Member
It leaks on all sides of the bulkhead on the exterior I've tried the 3/4" and the 9/16" it says in the manual and none of them work I've tried it both inside and out different ways and 3 different containers. It just keeps leaking and I also tried to caulk it with waterproof silicone and still no good. Yes I actually read that here haha good to know I helped you out!
Daniel266jz
Avid Member
Is there any other good misters because I might not be able to buy another right after this mist king is returned I'll need he money for a new car seat for my son?
Don't give up on the MistKing......
Get rid of the sterilite and start with a new container. Drill hole with size as stated in instructions. HAND TIGHT the bulk.....pay attention to which side is inside or outside bulk head. If it's truest a bad bulkhead, give them a call to have them resend you a new one.
Another thing to consider is....is your water line cut PERPENDICULAR (straight) clean cut.....and did you insert it all the way in?
Get rid of the sterilite and start with a new container. Drill hole with size as stated in instructions. HAND TIGHT the bulk.....pay attention to which side is inside or outside bulk head. If it's truest a bad bulkhead, give them a call to have them resend you a new one.
Another thing to consider is....is your water line cut PERPENDICULAR (straight) clean cut.....and did you insert it all the way in?
Daniel266jz
Avid Member
I've tried it both ways and yes I've tried already 3 different containers. I'm honesty just frustrated I wanted it to be done and have my panther have his nice listings but that's not happening is there an equal to the mistking?
Daniel266jz
Avid Member
Looks good and it's cheaper I might give clumsily a try. Where did you purchase yours?
J.Bauer
Member
Daniel266jz
Avid Member
Daniel266jz
Avid Member
I called LLLReptile and they said that they might not accept a return unless i get MistKing to say that their product was defective and she went on to repeat 3 times that I am doing it wrong. So I emailed Mistking and am awaiting a response. I hope I can get a replacement gasket or my money back. If not I will be very upset because ive researched videos and countless manuals on installing the MistKing i doubt im doing it wrong.
J.Bauer
Member
I doubt you are doing anything wrong. It's likely a faulty gasket or head. Maybe they can send you a new one. Hopefully at no cost.
Daniel266jz
Avid Member
Yea Id be surprised if I am doing it wrong. Ive researched for months on the site and Youtube and here. I planned this for at east a month and it turns out to not work it makes me frustrated and disappointed I want my panther to have his proper and nice mistings.
Similar threads
