My DIY Rain Nozzle Misting System For Under $75

Started piecing one together as well. Had a hard time going from the diaphragm pump to the tubing but finally figured that out with a part from Lowe's. Not sure what you are using.

I am wondering... putting the misting nozzle on the outside makes the water collect then drip like rain correct? Wouldn't making a motorized drip system would be easier and cheaper. $10 fountain pump to some tubing with the end pinched off and some holes poked in it.
 
bobbydigital said:
Did you get the ball valve from climist as well?
Click to expand...
Home Depot for $9.99 & a backup on Ebay for $3.49. I wanted to make the adjustment right away and didnt want to wait for the ebay one to arrive so I got one at Home Depot. Thats why I have 2..
 
Last edited:
NickTide said:
Started piecing one together as well. Had a hard time going from the diaphragm pump to the tubing but finally figured that out with a part from Lowe's. Not sure what you are using.

I am wondering... putting the misting nozzle on the outside makes the water collect then drip like rain correct? Wouldn't making a motorized drip system would be easier and cheaper. $10 fountain pump to some tubing with the end pinched off and some holes poked in it.
Click to expand...
The pump produces a fine mist throughout the cage. Some of the mist builds up on top of cage which causes rain droplets as well. A fountain pump wouldn't have enough pressure for the nozzle to produce a fine mist. Also the pump is only $19.99. I rather get the proper part then to try and go cheap and have issue later. Also, I could always add more nozzles upon upgrading cage later if i wanted to with this pump.
 
Last edited:
Panthro413 said:
The pump produces a fine mist throughout the cage. Some of the mist builds up on top of cage which causes rain droplets as well. A fountain pump wouldn't have enough pressure for the nozzle to produce a fine mist. Also the pump is only $19.99. I rather get the proper part then to try and go cheap and have issue later. Also, I could always add more nozzles upon upgrading cage later if i wanted to with this pump.
Click to expand...

I didnt think the mist would go through the cage but now that i thing about it... I mist with a spray bottle through the cage so i just wasnt thinking right. I have a similar system started. Same type pump but was planning to put the tube through the screen but i gues i don't have to.
 
Hi there!

I decided to use your model as a guide to build my own. I thought I bought the correct pump but my 1/4" tubing didn't fit perfectly like yours so I purchased two 1/4 to 3/4 adapter. These arrived and didn't work. For some reason the 1/4" tubing is smaller than the 1/4" hole on the adapter.
So... I used gorilla glue and some other tubing I had and made something from scratch.
After plugging in the pump I'm getting absolutely no water pumping. There's plenty of noise but absolutely no water flow.
Do you have any suggestions?
 

Attachments

  • 1.jpg
    1.jpg
    229.8 KB · Views: 226
  • 2.jpg
    2.jpg
    177.8 KB · Views: 249
  • 3.jpg
    3.jpg
    138.8 KB · Views: 244
  • unnamed.jpg
    unnamed.jpg
    268.7 KB · Views: 205
ZackTayl said:
Hi there!

I decided to use your model as a guide to build my own. I thought I bought the correct pump but my 1/4" tubing didn't fit perfectly like yours so I purchased two 1/4 to 3/4 adapter. These arrived and didn't work. For some reason the 1/4" tubing is smaller than the 1/4" hole on the adapter.
So... I used gorilla glue and some other tubing I had and made something from scratch.
After plugging in the pump I'm getting absolutely no water pumping. There's plenty of noise but absolutely no water flow.
Do you have any suggestions?
Click to expand...

Here is the makeshift connections I made lol
 

Attachments

  • 1.jpg
    1.jpg
    103.4 KB · Views: 241
  • unnamed.jpg
    unnamed.jpg
    155.6 KB · Views: 232
ZackTayl said:
Hi there!

I decided to use your model as a guide to build my own. I thought I bought the correct pump but my 1/4" tubing didn't fit perfectly like yours so I purchased two 1/4 to 3/4 adapter. These arrived and didn't work. For some reason the 1/4" tubing is smaller than the 1/4" hole on the adapter.
So... I used gorilla glue and some other tubing I had and made something from scratch.
After plugging in the pump I'm getting absolutely no water pumping. There's plenty of noise but absolutely no water flow.
Do you have any suggestions?
Click to expand...

In the pic of the bucket and ball valve, is the ball valve going out to the cage? Also which pump exactly did you buy? I've got four of these systems running now in different rooms so I'll try to help you if I can.
 
Also, since I'm in here, with 3/8 id tube going in and 1/4 od tube coming out, 16 nozzles is the most I've tried on these pumps now. This is a mix of 8 mistking/ climist nozzles and 8 .3mm cleanable amazon nozzles.
 
You must log in or register to reply here.

Similar threads

elizaann2
MistKing Ultimate Misting System
Replies
5
Views
695
elizaann2
elizaann2
D
how is my setup?
Replies
7
Views
276
Sonny13
Sonny13
Andrew1283
Idea for Dripper Bottle
2
Replies
31
Views
2K
Andrew1283
Andrew1283
StevensUneven
I've made the jump. My Panther Chameleon will be here in 2 weeks. Looking for any last minute advice.
Replies
16
Views
985
elizaann2
elizaann2
C
Shrink wrap Reptibreeze or DIY Cage?
Replies
13
Views
923
Nikkih08
Nikkih08
Back
Top Bottom