Dragon Ledge Alternative?

[DomsChams]

Sorry I had a class last night and forgot. So no.
Let me see if I can explain it. Figure your 24x24x48 is probably more like 23-3/4inches deep. Cut your outside pieces to be 23-3/4 if the cage frame is 1/2 inch hack saw part way thru the outside piece 1/2 inch from the end. Then fold down the flap to give yourself an extra screw placement.
View attachment 221764

Yes my enclosure is 4tallx2x2. And this piece goes on the outside of the enclosure to screw to the inside piece. This is very helpful thank you.

and said cut 1/2' from the end but how deep should i cut it with the hack saw, half way through? And did you screw tiny screws into those holes diectly to the frame of the enclosure. I know you dont have a ton of time but if you ever get the chance i would love to see how it looks on your enclosure if its not to much trouble so that I can kinda visualize it. The diagram helps i just want to see how you screwed it all up. An did you use bolts to connect everything?

 

[JacksJill]

I used metal screws (longest that won't penetrate to the inside of the cage) and a bit of gorilla glue to attach it to the cage frame. The door side frame is very thin and needed some extra support hence the glue.
I cut almost all the way thru at the 1/2 inch mark leaving the outside intact and then cut along the outside top edge to create the flap to fold down.
I will try to remember pictures tonight.

 

[JacksJill]

Here are the pictures.

 

[DomsChams]

Here are the pictures.
View attachment 221831View attachment 221832

This is exactly what I needed. Thanks k you so much. I'll try this and let you know how it worked. You're a life saver!